London Speed-lift Lash Lift Instructions: Step-by-Step Guide

How to carry out a lash lift with the London Speed-lift system from The London Brow Company, in 11 steps, with processing times for each lash type.

Professional use only. A patch test is mandatory before treatment. Always follow your training and the instructions supplied with your kit.

Written by The Foalyard from The London Brow Company's London Speed-lift lash lifting instructions.

Before you start

Skin sensitivity (patch) test

• Patch test 72 hours before treatment.
• Apply to the client's inner arm for at least 5 minutes.
• Record the test on the client record card.
• A negative result does not guarantee that no allergic reaction will occur during treatment.

For more detail, see our London Brow patch testing guide.

Caution: who shouldn't have this treatment

• Anyone under 16 years.
• Anyone with specific contraindications, for example skin irritations or reactions to perming products. Refer to your professional training.

Lash lift instructions: step by step

Step 1: Cleanse and fit the pad

• Cleanse the lashes thoroughly with London Brow and Lash Shampoo.
• Choose the right size silicone pad. Fix it to the upper eyelid with Speed-lift adhesive.

Step 2: Attach the lashes to the pad

• Run a strip of Speed-lift adhesive along the front of the silicone pad.
• Gently secure each lash onto the pad with the Speed-lift lash tool, placing them precisely.

Step 3: Apply Step 1 Perm Gel

• Apply Step 1 with a micro brush or the Speed-lift angled brush.
• Leave a 1–2 mm gap at the root.
• Cover up to 3/4 of the lash length. Avoid the tips.
• Apply a thick, even layer, working from the outer corner to the inner corner of the eye.

Step 4: Time the perm

Processing time depends on the client's natural lash type:

Start the timer once you've finished applying perm to the first eye.

Step 5: Remove the perm

• When the time is up, gently remove Step 1 with a damp cotton bud.
• Work slowly so you remove it all.
• Re-stick any loose lashes with lash adhesive.

Step 6: Apply Step 2 Neutralising Lotion

• Apply Step 2 setting lotion with a clean brush. Make sure the lashes are fully covered.
• Leave the neutralising lotion on for 5 minutes.

Step 7: Remove the neutraliser

• Remove Step 2 with a damp cotton bud, the same way you removed the perm.

Step 8: Tint (optional)

• You can tint while the lashes are still on the pads, or once you've taken them off.
• Limit tinting time to 5–6 minutes to avoid over-processing.

Step 9: Remove the tint

• Gently remove the tint with warm, damp cotton pads, wiping upwards.

Step 10: Apply Step 3 Nourishing Serum

• Gently lift the lashes away from the pad while you apply Step 3 Nourishing Serum.

Step 11: Dry and finish

• Let the lashes air dry for 1–2 minutes.
• Put a small amount of Step 3 on a micro brush and brush through to separate the lashes.
• Give the client aftercare instructions and recommend suitable post-treatment products.

Every client is different. Follow your training and adapt timings and technique to each client's brow or lash type.

Lash lift aftercare

• Avoid aggressive cosmetic treatments and hot environments for 24 hours.
• Avoid lotions, toners and creams in the treated area.
• Always brush brows and lashes up and into place after they get wet.

About London Speed-lift

• Waterproof, so clients can get their lashes wet within 24 hours of treatment.
• 100% vegan and cruelty-free.
• Synthetic-free, paraben-free and ammonia-free.

Storage

Store between +5°C and +25°C, away from heat and direct sunlight.

Manufacturer / responsible person

London Brow Company Limited
85 Great Portland Street, London, W1W 7LT, UK
Tel: +44 8003345373

Questions?

If you have a question about a Speed-lift kit you bought from us, contact us.

Related: Shop London Lash Speed-Lift · Patch testing guide · All London Brow instruction guides · Shop The London Brow Company